Pairing, network status and factory reset

On the back of the television, you find a button for pairing and for factory reset.

01e.-V200_mains_network_pairing.png

When you press and hold the PAIRING button 1.5 seconds, placed at the bottom of the television, you open the television for pairing with a remote control. To cancel pairing mode, press the button again.

Press and hold the FACTORY RESET button for more than 10 seconds, the television will be reset to factory settings, and all settings you have made, will disappear. 

The NETWORK STATUS indicator light beneath the FACTORY RESET button gives you a status of pairing and the network connection:

 

White (solid) Connected to a network.
White (flashing) The television has been disconnected from the mains supply, reconnected and is now starting. 
Orange (solid) Connected to a wireless network, the signal strength is low.
Orange (flashing) Connecting to a wireless network.
Red (solid shortly) Pairing did not succeed. Try again, if the problem persists, contact your retailer.
Red (flashing slowly) Software is being updated.
Blue (solid) Wireless network has not been set up, and there is no wired network connection.
Blue (solid shortly) Pairing succeeded.
Blue (flashing) The television is open for pairing.