Beoplay H9i first-time setup


We recommend that you charge your Beoplay H9i before using them for the first time.

    1. first1.png 1

      Charge Beoplay H9i for at least 20 minutes

      • Connect the included USB-A to USB-C cable to your Beoplay H9i and to a charging adapter, and connect the charging adapter to a power supply.
      • After charging your Beoplay H9i for 20 minutes, they're ready for the first-time setup.

      Note: A charging adapter of a maximum of 5V / 3A can be used to charge your Beoplay H9i.


    2. ON.png 2

      Switch on Beoplay H9i

      • Move the switch to the ON position to switch on Beoplay H9i
      • The product indicator light will turn white which indicates that the Beoplay H9i are switched on.

      Note: It's important to wait for the indicator light to turn off before putting on the Beoplay H9i, as this ensures a proper calibration of the proximity sensor

    3. BT_PAIRING.png 3

      Initiate Bluetooth pairing

      • Move the switch to the top position and hold it for 2 seconds
      • A blue indicator light will start flashing which indicates that pairing mode is now active, and Beoplay H9i are ready to be connected to your device (phone, computer, tablet, etc.)

    4. PHONE_CONNECT.png 4

      Connect to your favourite device

      Turn on Bluetooth on your device (phone, computer, tablet, etc.) to scan for new devices
      • Beoplay H9i will appear as an available connection
      • Tap Beoplay H9i to connect
      • Your Beoplay H9i are now ready to be used

      Note: Beoplay H9i remember up to 8 paired connections. When switched on they will attempt to reconnect to previously paired devices automatically.

Was this article helpful?

Thank you for the feedback!

Ready to help you 24/7