Beoplay E8 Bluetooth connection

banner1.png

Beoplay E8 remember up to 8 paired connections. When switched on they will attempt to reconnect to previously paired devices automatically.

    1. E8_onoff.JPG 1

      Switch on Beoplay E8

      • Remove both earbuds from the charging case
      • Switch on your Beoplay E8 by tapping the right earbud
      • The product indicator light will turn white which indicates that the Beoplay E8 are switched on.

    2. E8_btpair.JPG 2

      Initiate Bluetooth Pairing

      • Press and hold both earbuds for 5 seconds
      • The right earbud will start flashing blue which indicates that pairing mode is now active, and the earbuds are ready to be connected to your device (phone, computer, tablet, etc.)

      Note: The earbuds must be no more than 20 cm apart for the connection to work.

    3. mceclip3.png 3

      Connect to your favourite device

      Turn on Bluetooth on your device (phone, computer, tablet, etc.) to scan for new devices
      • Beoplay E8 will appear as an available connection
      • Tap Beoplay E8 to connect
      • Your Beoplay E8 are now ready to be used.

      Note: Beoplay E8 remember up to 8 paired connections. When turned on they will attempt to reconnect to previously paired devices automatically.

Was this article helpful?

Thank you for the feedback!

Ready to help you 24/7