If you want to remove all paired Bluetooth devices or are experiencing issues, you can reset Beoplay P6 to factory settings as described below: 

1. 1

   Fully charge Beoplay P6

   • Connect the included USB cable to the Beoplay P6 and to a charging adapter, and connect the charging adapter to a power supply.
   • After charging for around 2.5 hours, to ensure that it is fully charged, proceed to the next steps.
     
     Note: A charging adapter of a maximum of 5V / 3A can be used to charge your Beoplay P6.
2. 2

   Switch on Beoplay P6

   • Press the power button to switch on Beoplay P6. The product indicator light will turn white which indicates that Beoplay P6 is switched on.
3. 3

   Reset Beoplay P6

   • To remove all paired Bluetooth devices and settings, press and hold the power and volume "-" buttons simultaneously for around 12 seconds until the product indicator turns from red to white. Beoplay P6 is reset to factory settings (all paired devices are removed).
   • After resetting you will need to pair your Beoplay P6 to your mobile device again. This means that you need to remove it from the list of paired Bluetooth devices on your mobile device before adding it again.

Learn how to connect Beoplay P6 using Bluetooth by clicking here.