If you want to remove all paired Bluetooth devices or are experiencing issues while trying to connect, you can reset Beoplay E6 Motion to factory settings as described below:

1. 1

   Fully charge the Beoplay E6 Motion

   • Connect Beoplay E6 Motion to the charging dongle.
   • Connect the charging dongle to a charging adapter, and connect the charging adapter to a power supply.
   • After charging the Beoplay E6 Motion for around 2 hours, proceed to the next steps
   
   Note: You can use a charging adapter of a maximum of 5V / 3A to charge your Beoplay E6 Motion.
   

2. 2

   Switch on Beoplay E6 Motion

   • Disconnect Beoplay E6 Motion from the charging dongle.
   • Switch on your Beoplay E6 Motion by short pressing the centre button
   • The product indicator light will turn white which indicates that the Beoplay E6 Motion are switched on.

3. 3

   Reset Beoplay E6 Motion

   • Press and hold the volume +/- buttons simultaneously. 
   • The LED indicator will start flashing red which indicates that Beoplay E6 Motion has been factory reset
   
   After resetting you will need to pair your Beoplay E6 Motion to your mobile device again. This means that you need to remove Beoplay E6 Motion from the list of paired Bluetooth devices on your mobile device before adding them again.