What does the light indicator on my Beolab 18 mean?

The light indicator on your Beolab 18 can be read as follows:

Colour Meaning mceclip0.png
Red (solid) The indicator is solid red for some seconds when the speaker is connected to the mains, switches off, or when it restarts after it has been reset.
Green (solid) The indicator is solid green for some seconds when the speaker switches on, then it dims.
Green (flashing) A software update is in progress, during which the speaker cannot play. Do not disconnect from the mains.
Green (flashing quickly) If you have a wireless transmitter in your setup, the speaker is in associate mode and ready to be connected to the wireless transmitter.
Orange (solid) The signal strength for a wireless connection is low.
Orange (flashing slowly) The product is overheated and will shut down temporarily.
Orange (flashing quickly) An error has occurred. Disconnect the speaker from the mains and reconnect it again. If the problem persists, contact your Bang & Olufsen retailer.

Was this article helpful?

Thank you for the feedback!

Ready to help you 24/7