1

Open sound settings

• Select your product on the front page of the Bang & Olufsen App
• Tap 'Sound'

2

Set sensitivity

• Tap 'Line-in sensitivity'
• Choose between High, Medium, Low or Disabled
• The detection level will help your Bang & Olufsen product detect the received audio signal and switch on automatically.

3

Set latency

• Toggle "Line-in Low latency" on and off
• Be aware that when enabling Low latency, it is no longer possible to distribute sound from Line-in via Beolink Multiroom.

1

Open the settings menu

• Select 'Settings'
• Tap 'Products'
• Select the product you wish to make changes to

2

Make settings for Line-in

• Tap 'Configure'
• Tap 'Sound'
• Tap 'Line-In'.
• The detection level will help your Bang & Olufsen product detect the received audio signal and switch on automatically.
• Check or uncheck the Line-in delay according to the connected device. Delay should be removed when connecting video sources, but this means that the sound cannot be distributed within a Beolink Multiroom setup.
• If 'Fix sound level' is enabled, the Power Link socket outputs a Line-level signal. Be careful, as this requires an external volume control.