How do I make settings for Line-in sources in the Bang & Olufsen app?


You can set the detection level for Line-in sources and enable or disable Line-in delay using the Bang & Olufsen app as follows: 

    1. 1

      Open the settings menu

      • Select 'Settings'
      • Tap 'Products'
      • Select the product you wish to make changes to
    1. 2

      Make settings for Line-in

      • Tap 'Configure'
      • Tap 'Sound'
      • Tap 'Line-In'.
      • The detection level will help your Bang & Olufsen product detect the connected audio signal and switch on automatically.
      • Check or uncheck the Line-in delay according to the connected device. Delay should be removed when connecting video sources, but this means that the sound cannot be distributed within a Beolink Multiroom setup.
      • If 'Fix sound level' is enabled, the Power Link socket outputs a Line-level signal. Be careful, as this requires an external volume control. 

This feature is not available for the following products:

  • Beosound Balance
  • Beosound Level
  • Beosound Emerge
  • Beolab 28
  • Products with Google Assistant built-in

Was this article helpful?

Thank you for the feedback!

Ready to help you 24/7