This applies to the following products: BeoSound Essence 2nd generation with IR-eye, BeoSound Core (IR version), and BeoSound 35.
You must select if you want to operate your Beosound with either BeoRemote One or Beo4, you cannot use both at the same time.
To operate Beosound Essence 2nd generation with IR-eye, Beosound Core (IR version) and Beosound 35 with BeoRemote One, you must set the BeoRemote One in Product Option 'Beosound'.
Refer to BeoRemote One User Guide for more information.
To use Beo4, you must set the audio system in A.OPT 1.
Set A.OPT 1 with Beo4…
Point the Beo4 remote control at the IR-receiver of the audio system.
- While holding down the • button, press LIST.
- Let go of both buttons.
- Press LIST repeatedly until OPTION? is shown in the Beo4 display and press GO.
- Press LIST repeatedly until A.OPT is shown in the Beo4 display and then press the number button 1.
Source or function | BeoRemote One | Beo4 |
BLUETOOTH |
Press MUSIC and select BLUETOOTH.* |
N/A |
DEEZER |
Press MUSIC and highlight DEEZER.* Press the centre button to switch on the source. |
N/A |
JOIN |
Press LIST and select JOIN. |
Press LIST repeatedly to bring up JOIN in the display. Press the centre button to switch on the source. |
LINE-IN |
Press MUSIC and select LINE IN.* |
Press LIST repeatedly to bring up A.AUX in the display. Press the centre button to switch on the source. |
MUSIC |
Press MUSIC and select MUSIC* The combined Deezer and HomeMedia (UPnP) play queue. |
Press LIST repeatedly to bring up A.MEM in the display. Press the centre button to switch on the source. |
QPLAY |
Press MUSIC and select QPLAY.* When in China. |
Press LIST repeatedly to bring up N.MUSIC in the display. Press the centre button to switch on the source. |
SPOTIFY |
Press MUSIC and select SPOTIFY.* |
Press LIST repeatedly to bring up CD or SPOTIFY in the display. Press the centre button to switch on the source. |
RADIO |
Press MUSIC and select RADIO.* Last played station. |
Press RADIO. |
OPTICAL |
Press MUSIC and select OPTICAL |
N/A |
MyButton** |
Switch on the source you have dedicated to the MyButton. |
N/A |
Available link sources for your setup. |
N/A |
* The sources are only shown if you have added them to the list in the BeoRemote One.
** For information on how to set up a MyButton for a specific source, see the BeoRemote One online guide.