Service and software update


In the Service menu, you can update software, connect to a wireless network and pair another remote control. It is also possible to make more advanced service settings, ie. reset your Soundcenter to default factory settings, however, note that the Advanced menu is primarily intended for the installer and for service use. If your Beovision Harmony is set up in a system, it is essential that you enable the Automatic System Update to ensure that all products in your system are kept up to date and are able to communicate.

You can always look up software information and update the TV software manually.

  1. Press mceclip5.png to bring up the Home menu.
  2. Use the arrow buttons to select the Bang Olufsen TV App and press the centre button.
  3. Press mceclip8.png or mceclip11.png to select Sound & BeoLink... and press the centre button.
  4. Press mceclip8.png or mceclip11.png to select Service and press the mceclip12.png button. 
  5. Press mceclip8.png or mceclip11.png to select a menu item and press the centre button.
  6. Follow on-screen instructions. 

Update software

To download available software updates in the Software Update menu, your Beovision Harmony must be connected to the Internet. It is recommended that you set the Beovision Harmony to update software automatically.

Contact your retailer for more information about software updates.

Check for updates

Select CHECK FOR UPDATE and press the centre button, the Beovision Harmony should check for new software. If any updates are available, press the centre button to start updating and follow on-screen instructions.

While the Beovision Harmony is updating with new software, the standby indicator flashes red and the Beovision Harmony should remain connected to the mains.
When updating is completed a short notification is shown on the top right corner of the screen.

To view the release notes…

  1. Press mceclip5.png to bring up the Home menu.
  2. Use the arrow buttons to select the Bang & Olufsen TV app and press the centre button.
  3. Press mceclip8.png or mceclip11.png to select Sound & BeoLink... and press the centre button.
  4. Press mceclip8.png or mceclip11.png to select Service and press the mceclip12.png button.
  5. Press mceclip8.png or mceclip11.png to select Software Update and select Release Notes and press the centre button.

Auto system updates

If you have a system set up with several Bang & Olufsen products, the entire system is updated when you check for updates. You should enable automatic software update of the system in the TV menu. Available software updates for all the Bang & Olufsen products in your setup will then be downloaded automatically on a regular basis.* 

*You can only enable or disable Automatic System Updates on the entire system and not on a single product.

Pair your remote control

In the Remote Control Pairing menu, you can pair another BeoRemote One with your Beovision Harmony.

  1. In the Remote Control Pairing menu, press PAIR.
  2. If the remote control is open for pairing, pairing takes place.

Unpair a remote...

  1. In the Remote Control Pairing menu, highlight the device you wish to unpair and press the centre button.
  2. Highlight DELETE and press the centre button. 

Activate a specific source from standby

Select a specific source to start up when you press the TV or MUSIC button respectively to switch on the television from standby.

Set up a wireless network

In the Wireless Network Setup menu, you can search for and connect your Beovision Harmony to a wireless network

Usage data - Privacy & Terms

To help us improve our range of available products and services offered to you, we may request certain information from your product about its performance and usage patterns. The information will at all times be provided on an anonymous basis only. You can at any time enable or disable this function in the Usage Data - Privacy Terms.

Next: Stand settings

Was this article helpful?

Thank you for the feedback!

Ready to help you 24/7


Our support site is under construction

We are creating a brand-new support section for you, and this particular product group is not yet available, unfortunately.

For support of these products, we refer to the support pages accessed via the link below.

Chat support under construction

We are working on providing you with a brand-new feature.
If you need assistance with your product, please contact our service team through the contact form or by calling us.
Virtual Assistant
Powered by Zendesk