Beoplay H7 first-time setup

We recommend that you charge your Beoplay H7 before using them for the first time.

    1. mceclip0.png1

      Charge Beoplay H7 for at least 20 minutes

      • Connect the included Micro-USB cable to your Beoplay H7 and to a charging adapter, and connect the charging adapter to a power supply.
      • After charging your Beoplay H7 for 20 minutes, they're ready for the first-time setup.

      Note: A charging adapter of a maximum of 5V / 3A can be used to charge your Beoplay H7.


    2. mceclip1.png2

      Switch on Beoplay H7

      • Move the switch to the ON position to switch on Beoplay H7
      • The product indicator light will turn white which indicates that the Beoplay H7 is switched on.

    3. mceclip0.png3

      Initiate Bluetooth pairing

      • Move the switch to the top position and hold it for 2 seconds
      • A blue indicator light will start flashing which indicates that pairing mode is now active, and Beoplay H7 is ready to be connected to your device (phone, computer, tablet, etc.)

    4. mceclip2.png4

      Connect to your favourite device

       Turn on Bluetooth on your device (phone, computer, tablet, etc.) to scan for new devices
      • Beoplay H7 will appear as an available connection
      • Tap Beoplay H7 to connect
      • Your Beoplay H7 are now ready to be used

      Note: When switched on, Beoplay H7 will attempt to reconnect to previously paired devices automatically.

Was this article helpful?

Thank you for the feedback!

Ready to help you 24/7


Our support site is under construction

We are creating a brand-new support section for you, and this particular product group is not yet available, unfortunately.

For support of these products, we refer to the support pages accessed via the link below.

Chat support under construction

We are working on providing you with a brand-new feature.
If you need assistance with your product, please contact our service team through the contact form or by calling us.
Virtual Assistant
Powered by Zendesk