Close search
Go to bang-olufsen.com
Close search
  1. Bang & Olufsen Support
  2. Speakers
  3. Beolit 12
  4. Getting started & daily use
Beolit 12

Beolit 12 first-time setup

BL12b1.jpg

Use the Bang & Olufsen app to configure and connect your Beolit 12 to your network. 

Please note that only WLAN 802.11 b/g 2.4 GHz networks are supported.

1

Connect Beolit 12 to the mains supply

  • On the Beolit 12, press the On/Off button shortly. Then wait for the On/Off button to become solid white.
  • Press the network button shortly and wait approx. 45 secs, until you hear a sound feedback. Press the network button again this time for more than 3 secs, until you hear a sound feedback. Then wait for the network button to flash green (takes approx. 1 minute).
  • Go to Settings, then Wi-Fi on your mobile device and select Beolit12_Setup_ and connect to it.
mceclip0.png

2

Download the Bang & Olufsen app

  • Open the Bang & Olufsen app. Tap on the settings icon in the top right corner and select ‘Add product’. In the next window, a small pop up will appear on the bottom of the screen, press ‘OK’
  • The app will search for the Beolit 12 and if the search is complete the following page will appear. Select ‘Set up’. 
  • Follow the instructions provided to complete the setup process.
mceclip1.png

 

Alternative setup procedure

  • Connect Beolit 12 to a computer using an Ethernet cable.
  • Press the network button shortly.
    The network button flashes white for about 60 seconds, and you hear a sound feedback.
    Then it flashes orange for about 60 seconds and becomes solid white.
  • Enter the IP address ‘http://169.254.11.22’ in the browser of your computer. If the page is not displayed,  wait a while and refresh the page.
  • Select the ‘NETWORKS’ menu and follow the on-screen instructions.
  • Disconnect Beolit 12 from your computer.
    The network button flashes white, and you hear a sound feedback. Then it becomes solid white, and Beolit 12 is connected to the network.

How do I set up my Beolit 12 using a computer?

Was this article helpful?

Thank you for the feedback!

Ready to help you 24/7

CONTACT US

CONTACT CUSTOMER CARE

Our Customer Care team is ready to assist you.

CONTACT US CONTACT US

Our support site is under construction

We are creating a brand-new support section for you, and this particular product group is not yet available, unfortunately.

For support of these products, we refer to the support pages accessed via the link below.

Chat support under construction

We are working on providing you with a brand-new feature.
If you need assistance with your product, please contact our service team through the contact form or by calling us.
Virtual Assistant
X
Powered by Zendesk