Remote control

The operation for the Beovision Harmony is described with Beoremote One.

Pair your remote control

Note that to operate your Beovision Harmony, it must first be paired with Beoremote One. Long press the PAIRING button placed on the back of the right speaker box or pair through the Service menu found when you select the Bang & Olufsen TV App in the home menu and select Sound & BeoLink.... Remember to set your remote control in pairing mode before pairing.


  1. Connect the television to the mains.
  2. Put in fresh batteries in your remote control and place yourself in front of the product.
  3. After timeout of a welcome screen in the display,use mceclip8.png or mceclip11.png and the centre button to set the preferred language.
  4. If the product is opened for pairing, pairing takes place.

Pair via the menu...

  1. Press mceclip5.png to bring up the Home menu.
  2. Use the arrow buttons to select the Bang & Olufsen TV app and press the centre button.
  3. Press mceclip8.png or mceclip11.png to select Sound & BeoLink...  and press the centre button.
  4. Press mceclip8.png or mceclip11.png to select Service and press the mceclip12.png button.
  5. Press mceclip8.png or mceclip11.png to select Remote control pairing and press the centre button.

Follow on-screen instructions to pair your remote control.

Both the Beovision Harmony and the remote control must be in pairing mode to be able to pair the two products.

When you receive Beoremote One together with your Beovision Harmony, you set it in pairing mode during first time setup of the remote control. If your Beoremote One for some reason is no longer paired to the Beovision Harmony and you need to pair it again, or if you cannot find it and you need to pair another Beoremote One, you must set both Beovision Harmony and remote control in pairing mode to pair it to the television. 

For more about pairing, see the article Pairing, network status and factory reset.

Use your remote control

See how to use your remote control. Some instructions for the Beovision Harmony may be descriptions of LG guidance. You also find an explanation of which Bang & Olufsen buttons to use instead of selected LG buttons.

  • Display
    The display shows you a list of sources or functions when it is switched on. 
  • TV
    Display available television sources in the display for you to switch on. Use mceclip8.png or mceclip11.png to step in the list*.
    Display available music sources in the display for you to switch on. Use mceclip8.png or mceclip11.png to step in the list*.
  • mceclip2.png (MyButtons)**
    Long press to save the current setup, such as sound settings and stand positions, short press to activate it. 
  • 0–9
    Select channels and enter information in on-screen menus.
  • LIST
    Display extra functions in the display. Use mceclip8.png or mceclip11.png to step in the list.
    Bring up the TV Programme Guide.
  • mceclip3.png (Back button)
    Leave or move backwards through TV menus and the Beoremote One lists.
  • INFO
    Bring up information on a menu or function.
  • mceclip5.png (Home button)
    Bring up the Home menu, from where you can access different apps and functions, among other the Bang & Olufsen TV app.
  • mceclip8.png, mceclip11.pngmceclip4.png and mceclip12.png
    Arrow buttons up, down, left and right. Move-in menus and in the Beoremote One display.
  • mceclip5.png (Centre button)
    For selecting and activating, for example, settings.
  • mceclip6.png, mceclip7.png, mceclip8.png and mceclip9.png (Colour buttons)
    Select colour specific functions.
  • mceclip10.png
    Start playback of a track, file or recording or start replay.
  • mceclip11.png and mceclip12.png
    Search backwards or forwards step by step.
  • mceclip13.png and mceclip14.png
    Step through channels and stations.
  • mceclip15.png
    Pause playback of a programme or recording.
  • mceclip16.png and mceclip17.png
    Adjust volume. To mute, press the middle of the button.
  • mceclip18.png (Standby button)
    Switch to standby.

*Some sources in the display can be reconfigured during the setup process. For more information, see the article Set up connected products. 

**Depending on your remote control, mceclip19.pngmceclip20.pngmceclip21.pngmceclip22.png (MyButtons) may be either one button or four.

LG remote functions with the Beoremote One

Some of the LG remote functions can be accessed using your Bang & Olufsen remote control and found under LIST.

You should use the arrow buttons and the centre button to navigate on the television screen.

  • HOME button
    Press mceclip23.png
  • Left, Right, Up and Down buttons
    Press mceclip8.pngmceclip11.pngmceclip4.png and mceclip12.png .
  • (OK) button
    Press the centre button.
  • P Up and P Down buttons
    Press mceclip13.png and mceclip14.png.
  • LIST button
    Press LIST then mceclip8.png or mceclip11.png to find Channels in the Beoremote One display and press the centre button.
  • Quick Settings button
    Press LIST then mceclip8.png or mceclip11.png to find Options in the Beoremote One display and press the centre button.
  • TEXT
    Press LIST then mceclip8.png or mceclip11.png to find Text in the Beoremote One display and press the centre button.
  • T.OPT (Text options)
    Press LIST then mceclip8.png or mceclip11.png to find T.Opt in the Beoremote One display and press the centre button.
  • REC
    Press LIST then mceclip8.png or mceclip11.png to find Record in the Beoremote One display and press the centre button.
    Press LIST then mceclip8.png or mceclip11.png to find Search in the Beoremote One display and press the centre button.
    Press mceclip23.png and use the arrow button then the centre button to find the Search field.
    Press LIST then mceclip8.png or mceclip11.png to find Recent in the Beoremote One display and press the centre button.
    Press LIST then mceclip8.png or mceclip11.png to find Subtitles in the Beoremote One display and press the centre button.
  • AD
    PressLIST then mceclip8.png or mceclip11.png to find Audio Description in the Beoremote One display and press the centre button.
    PressLIST then mceclip8.png or mceclip11.png to find Multiview in the Beoremote One display and press the centre button.

Next: Basic operation

Was this article helpful?

Thank you for the feedback!

Ready to help you 24/7


Our support site is under construction

We are creating a brand-new support section for you, and this particular product group is not yet available, unfortunately.

For support of these products, we refer to the support pages accessed via the link below.

Chat support under construction

We are working on providing you with a brand-new feature.
If you need assistance with your product, please contact our service team through the contact form or by calling us.
Virtual Assistant
Powered by Zendesk