Yes, you can connect your Bang & Olufsen speakers or subwoofers to non-Bang & Olufsen products.
The speakers/subwoofers must be connected to the line output (volume controlled line out) of the amplifier. Different kinds of cables are required depending on the type of sockets on your speaker/subwoofer, see the table below. The cables are available from your Bang & Olufsen retailer. You can find your nearest retailer here.
If there is no Line-in connection on the speakers/subwoofers, and a Power Link is required, then use a Line/Power Link adaptor cable.
| Loudspeaker | Sockets |
| Beolab 11 | Power Link |
| Beolab 5 | Phono / RCA / Cinch |
| Beolab 9 | Power Link |
| Beolab 8002 | Phono / RCA / Cinch |
| Beolab 6002 | Phono / RCA / Cinch |
| Beolab 3 | Power Link |
| Beolab 4000 | Power Link |
| Beolab 4 | Mini-jack |
| Beolab 2 | Line adaptor |
| Beolab 12 | Power Link |
| Beolab 10 | Power Link |
| Beolab 14 | Power Link |
| Beolab 15 | Power Link |
| Beolab 16 | Power Link |
| Beolab 17 | RCA (R-input-L) / Optical |
| Beolab 18 | RCA (R-input-L) / Optical |
| Beolab 19 | RCA (R-input-L) |
| Beolab 20 | RCA (R-input-L) / Optical |
| Beolab 50 | RCA (R-input-L) (2 x RCA) Optical S/P-DIF (1 x RCA) USB-B Audio |
| Beolab 90 | RCA (R-input-L) (2 x RCA) Optical S/P-DIF (1 x RCA) USB-B Audio XLR |
You can also connect Bang & Olufsen passive speakers to non-Bang & Olufsen products. This type of speaker needs to be connected to any standard power amplifier output.
| Loudspeaker | Sockets |
| BeoVox 1 | Speaker terminal |
| BeoVox 2 | Speaker terminal |
