Yes, you can connect your Bang & Olufsen speakers or subwoofers to non-Bang & Olufsen products.
The speakers/subwoofers must be connected to the line output (volume controlled line out) of the amplifier. Different kinds of cables are required depending on the type of sockets on your speaker/subwoofer, see the table below. The cables are available from your Bang & Olufsen retailer. You can find your nearest retailer here. If there is no line in on the speakers/subwoofers and a PowerLink is required, then use a Line/PowerLink adaptor cable.
|
Loudspeaker |
Sockets |
|
BeoLab 11 |
Power Link |
|
BeoLab 5 |
Phono/RCA/Cinch |
|
BeoLab 9 |
Power Link |
|
BeoLab 8002 |
Phono/RCA/Cinch |
|
BeoLab 6002 |
Phono/RCA/Cinch |
|
BeoLab 3 |
Power Link |
|
BeoLab 4000 |
Power Link |
|
BeoLab 4 |
Mini-jack |
|
BeoLab 2 |
Line adaptor |
|
BeoLab 12 |
Power Link |
|
BeoLab 10 |
Power Link |
|
BeoLab 14 |
power Link |
|
BeoLab 15 |
Power Link |
|
BeoLab 16 |
Power Link |
|
BeoLab 17 |
RCA (R-input-L) / TOSLINK |
|
BeoLab 18 |
RCA (R-input-L) / TOSLINK |
|
BeoLab 19 |
RCA (R-input-L) |
|
BeoLab 20 |
RCA (R-input-L) / TOSLINK |
|
BeoLab 50 |
RCA (R-input-L) (2 x RCA) |
|
BeoLab 90 |
RCA (R-input-L) (2 x RCA) |
You can also connect Bang & Olufsen passive speakers to non-Bang & Olufsen products. This type of speaker needs to be connected to any standard power amplifier output.
|
Loudspeaker |
Sockets |
|
BeoVox 1 |
speaker terminal |
|
BeoVox 2 |
speaker terminal |
