How do I update software on Beolit 12 via my MAC/PC?

BL12b1.jpg
Follow the steps below to update the software on the Beolit 12 using your MAC/PC:

  1. Image 

    Connect your Beolit 12 to the router

    • Connect Beolit 12 to the mains and connect it to your router with an Ethernet cable.
    • On Beolit 12, press the On/Off button Imageshortly. Then wait for the On/Off button to become solid white.
    • On Beolit 12, press the network button Imageshortly. Then wait for the network button to become solid white. This takes approximately 2 minutes. Find Beolit 12 on your Mac/PC:

Change settings using Mac OS

  1. Open the Wi-Fi settings of your Mac and select "Beolit12_xxxxxxxx."
  2. Open your browser to access the Beolit 12 Setup page by typing "192.168.1.1" in the address bar

Change settings using Windows 8

  1. Point to the upper-right corner of the screen -> move the mouse pointer down and then click "Search" -> click "Apps", enter File Explorer in the search box and press Enter. Click "Network" in the left pane and double-click on "Beolit 12_ xxxxxxxx".
  2. Open your browser to access the Beolit 12 Setup page by typing "192.168.1.1" in the address bar. 

Change settings using Windows 10

  1. Open the Wi-Fi settings of your computer and select "Beolit 12_ xxxxxxxx".
  2. Open your browser to access the Beolit 12 Setup page by typing "192.168.1.1" in the address bar. 

 

To complete the process, follow these steps:

  • Select the menu UPDATE PRODUCT SOFTWARE.
  • Click YES if you are sure that you would like to proceed with the update. Once started, the update process must not be interrupted or stopped.
  • Now you can close the Beolit Setup page on your computer.
  • While the software update is in progress, the Beolit 12 buttons flash. Wait until the On/Off button becomes solid white, which indicates that the software update is complete. The software update takes approximately 5 minutes.
  • When the On/Off button is solid white, you can disconnect the Ethernet cable between Beolit 12 and your router.

** 'XXXXXXXX' corresponds to the serial number of your Beolit 12. If you have changed the name of your Beolit 12, the name you have chosen is shown instead.

Important! You may not be able to use your workplace computer to update the software on your Beolit 12, due to security restrictions, including firewall settings and assignment of IP addresses.

Was this article helpful?

Thank you for the feedback!

Ready to help you 24/7