How do I connect the cable to my Beoplay H6 2nd Gen?


If the cable is not connected properly, you may only hear sound in the right side or poor sound in both sides of your Beoplay H6 2nd Gen. To resolve this issue, make sure that the connector is fully inserted.

In addition, when the cable is connected as shown in the illustration below to the left with the controls closest to your device, you may only hear sound in the left side of the headphones.


The volume level depends on the settings you have made for the device connected to your Beoplay H6 2nd Gen. If the volume level remains low when increasing the volume using the cable controls, you may have limited the maximum volume on your device. To increase the volume limit, see the guide enclosed with your device.

Was this article helpful?

Thank you for the feedback!

Ready to help you 24/7