We recommend that you charge your Beoplay H95 before using them for the first time.
1
Charge Beoplay H95 for at least 20 minutes
Connect the included USB-A to USB-C cable to your Beoplay H95 and to a charging adapter and connect the charging adapter to a power supply.*
After charging your Beoplay H95 for 20 minutes, they're ready for the first-time setup.
2
Switch on Beoplay H95
Move the switch to the ON position to switch on Beoplay H95.
The product indicator will start flashing blue to indicate pairing mode, and your Beoplay H95 are ready to be connected to your device (phone, computer, tablet, etc.).
3
Initiate Bluetooth pairing
If you want to Bluetooth pair to another device after the first-time setup, simply follow the instructions below:
Move the switch to the top position and hold it for 2 seconds.
A blue indicator light will start flashing which indicates that pairing mode is now active, and Beoplay H95 are ready to be connected to your device (phone, computer, tablet, etc.)
4
Connect to your favourite device
Turn on Bluetooth on your device (phone, computer, tablet, etc.) to scan for new devices.
Beoplay H95 will appear as an available connection
Tap Beoplay H95 to connect
Your Beoplay H95 are now ready to be used
When switched on they will attempt to reconnect to previously paired devices automatically.
*Accepts up to 5 V / 3 A (15 W). You can safely use a higher‑wattage USB charger, but the product will draw a maximum of 15 W.
We are creating a brand-new support section for you, and this particular product group is not yet available, unfortunately.
For support of these products, we refer to the support pages accessed via the link below.
Chat support under construction
We are working on providing you with a brand-new feature.
If you need assistance with your product, please contact our service team through the contact form or by calling us.
