Can I connect Beoplay M3 to a non-Bang & Olufsen TV or sound system?


Yes, you can connect your TV or sound system to the Line-in socket on Beoplay M3. Note that when connecting to a TV, there is a small sound delay, and therefore sound and image are not completely synchronised. This delay can be disabled/enabled using the Bang & Olufsen app:

  1. Open the Bang & Olufsen app
  2. Tap the "Settings" icon in the upper-right corner
  3. Tap: Settings
  4. Tap "Products"
  5. Tap your Beoplay M3
  6. Tap "Configure"
  7. Tap "Sound"
  8. Select Line-in and tick "Disable Delay"
    Note: If the delay is disabled, you cannot distribute sound from the Line-in input in a Beolink Multiroom setup.

To listen to the sound from a TV or sound system connected to Line-in, you must start playback on the connected device for Beoplay M3 to detect the audio signal.

Was this article helpful?

Thank you for the feedback!

Ready to help you 24/7


Our support site is under construction

We are creating a brand-new support section for you, and this particular product group is not yet available, unfortunately.

For support of these products, we refer to the support pages accessed via the link below.

Chat support under construction

We are working on providing you with a brand-new feature.
If you need assistance with your product, please contact our service team through the contact form or by calling us.
Virtual Assistant
Powered by Zendesk