How to connect Beovision Eclipse 2nd Gen to a different Wi-Fi network

bo_header_televisions_eclipse_2.jpg

The Beovision Eclipse 2nd Gen Soundcenter and the LG screen are individually connected to the Wi-Fi network.
If the Wi-Fi SSID or password is changed, both the Soundcenter and the LG screen must be reconnected using the new Wi-Fi credentials.

How to reconnect the Soundcenter on Beovision Eclipse 2nd Gen to the network:

  1. Go to the 'Bang & Olufsen' app on the LG TV
  2. Select 'Sound & Beolink'
  3. Navigate to the 'Service' tab
  4. Go to 'Wireless Network Setup'
  5. Select the network that should be connected
  6. Enter Wi-Fi password and select Enter
  7. Wi-Fi is connected

  1. Go to 'Settings' on the LG TV
  2. Select 'All settings'
  3. Navigate to the 'Connection' tab
  4. Go to 'Network connection settings'
  5. Select 'Wi-Fi connection'
  6. Select the network that should be connected
  7. Enter Wi-Fi password and select Enter
  8. Wi-Fi is connected


Was this article helpful?

Thank you for the feedback!



Ready to help you 24/7

6

Our support site is under construction

We are creating a brand-new support section for you, and this particular product group is not yet available, unfortunately.

For support of these products, we refer to the support pages accessed via the link below.

Chat support under construction

We are working on providing you with a brand-new feature.
If you need assistance with your product, please contact our service team through the contact form or by calling us.
Virtual Assistant
X
Powered by Zendesk