My Beoplay P6 will not switch on, unless it is connected to the USB-C charging cable, what to do?

1. Factory reset

   Press and hold the <Power> and <Volume down> buttons simultaneously for more than 3 seconds until the light indicator turns red. This will remove all paired Bluetooth devices and settings. After the procedure is done, you can switch on the speaker again, and it will go straight into Bluetooth pairing mode.

2. Hardware reset

   A hardware reset can often solve an issue where Beoplay P6 has stopped responding.
   Press and hold the <Power> and <Volume up> buttons simultaneously for 12 seconds.

3. Beoplay P6 is in “display mode”

   Please follow the instructions below to exit “display mode”:

• Insert the USB-C cable.
• Press and hold the <Power> and <Volume down> buttons at the same time for about 5 seconds.
• The light indicator will start flashing white quickly.
• Remove the USB-C cable, and the speaker should remain switched on.

To ensure reliable operations of Beosound Explore, we recommend making sure it is always updated to the latest software version. The product settings page in the Bang & Olufsen app will show if a software update is available for your Beoplay P6.