If you want to remove all paired Bluetooth devices or are facing issues with pairing, you can reset Beoplay H9 to factory settings as described below:

1. 1

   Fully charge the Beoplay H9

   • Connect the included Micro-USB cable to the Beoplay H9 and a charging adapter to a power supply.
   • After charging the Beoplay H9 for around 2.5 hours, proceed to the next steps
   
   Note: A charging adapter of a maximum of 5V / 3A can be used to charge your Beoplay H9.
   

2. 2

   Switch on Beoplay H9

   • Switch on your Beoplay H9 by moving the switch to the ON position
   • The product indicator light will turn white which indicates that Beoplay H9 is switched on.

3. 3

   Reset Beoplay H9

   • Move the switch to the top position (Bluetooth icon) and hold the switch for around 10 seconds. When the indicator flashes red for 2 seconds, Beoplay H9 is reset to factory settings (all paired devices are removed).
   • After resetting you will need to pair your Beoplay H9 to your mobile device again. This means that you need to remove Beoplay H9 from the list of paired Bluetooth devices on your mobile device before adding them again.

Learn how to connect Beoplay H9 using Bluetooth by clicking here.