Pairing the left and right earphone of your Beoplay E8 3rd Gen with software versions 5.8.0 to 6.0.0

Important: The steps below should only be followed if you are unable to trigger the Bluetooth pairing mode on your Beoplay E8 3rd Gen.

From software version 5.8.0, the pairing procedure of the left and right earphone has changed.
Read the instructions or watch the video below to learn how to pair the left and right earphone of your Beoplay E8 3rd Gen.

Double-tap and hold both earphones at the same time for 15 seconds.
The light indicator will turn red first and then green.
Once the light indicator has turned green, wait for 3 seconds and then place the earphones back in the charging case.

Note: You have 1 minute to perform the procedure after removing the earphones from the charging case.

IMPORTANT: If the light indicator does not turn green, your Beoplay E8 3rd Gen have software version is 6.1.0 which requires a different pairing procedure. Please follow the description here.

Additional instructions
- You are now ready to connect your Beoplay E8 3rd Gen. To learn how to connect your Beoplay E8 3rd Gen click here.
- To avoid the left and right earphone losing connection to each other, we recommend updating the software of your Beoplay E8 3rd Gen. Please follow the description here.

Was this article helpful?

Ready to help you 24/7

CONTACT CUSTOMER CARE

Our Customer Care team is ready to assist you.

Pairing the left and right earphone of your Beoplay E8 3rd Gen with software versions 5.8.0 to 6.0.0

Additional instructions

Was this article helpful?

Ready to help you 24/7

CONTACT CUSTOMER CARE

Our support site is under construction

Chat support under construction